|
Current
Category
DCC
Lenz Starter Set 090
The Set-90 supports 31 XpressNet handhelds, 4 digit addressing, all forms of programming including our advanced one step address programming and operations mode programming, layout control feedback, advanced consisting, control of 256 locomotives and 999 turnouts, and 28 NMRA DCC functions (F1-F28 plus F0 forward and F0 reverse). The Set 90 is ideal for those DCC users who enjoy the feel of a well designed knob controller
|
|
Lenz Starter Set 100
The Set-100 supports 31 handhelds, 4 digit addressing, all forms of programming, layout control feedback, advanced consisting, control of 256 locomotives and 1024 turnouts, and all 28 NMRA DCC functions (F1-F28 plus F0 forward and F0 reverse).
The LH100 included with the Set-100 can also create momentary functions on a per function per locomotive basis. XpressNet devices such as the LH100, LH90, and XPA can take advantage of any available momentary functions once set up by a LH100.
The Set-100 is ideal for those users who enjoy the greater precision of push button control or for those that want the most features.
|
|
LENZ Interface LAN and USB adaptor
The new Digital plus Li-USB-Ethernet Interface not only offers a USB interface, but also an Ethernet interface which facilitates the connection of the device to a PC and/or router. This opens up interesting new possibilities for model railway control, now wireless control using an iPod Touch or iPhone is a reality! More info here:
http://www.lenzusa.com/1newsite1/iPhoneControl.html
|
|
|
|
Front Panel and adaptor
An easy way to add extra throttle plugs to a layout. Has two DIN Ports and one RJ12 Port per panel.
|
|
AMD4 Atlas Locos drop in decoder
AMD4 is a four function BEMF drop-in decoder for Atlas: B23-7, B30-7, B36-7, C628, C630, Dash8-32BW, Dash8-40B, GP38, GP-40, GP-40-2, SD-7, SD-9, SD-24, SD-26, SD-35.
|
|
K0D8-B for F3/F7 drop in decoder
Drop-in decoder for Kato N Scale engines: F3A, F7A. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED .1 Onboard superbright, Golden White LED's, with medium leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs. Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm
|
|
M3 N scale general wired decoder
The M3 is a micro, hardwire HO & N scale decoder. This decoder can be hardwired, or purchased with a few 8 pin NMRA harnesses attached. Provides 1 amp continuous and 2 amp peak draw. The M3 features the TCS exclusive auto-adjusting BEMF. The M3 is a motor control decoder with three lighting functions (forward/reverse light, and one extra function)
Dimensions .567”x.359”x.135” or 14.4mm x 9.12mm x 3.43mm
|
|
MC4 Decoder with harness
An HO scale decoder a 7 pin JST socket. This decoder can be hardwired, or connected to the 8-pin NMRA sockets using a variety of the available harnesses. Provides 1 amp continuous and 2 amp peak draw. The MC4 features TCS exclusive auto-adjusting BEMF.
The MC4 is a motor control decoder with four lighting functions (forward/reverse light, and two extra functions)
Dimensions .729” x .417” x .189” or 18.5 mm x 10.6 x 4.8 mm
|
|
Z2 Z scale decoder for wired in applications
True Z Scale decoder -- under 7mm in width.
Fits all Z-Scale Diesel Locomotives.
Super small size with powerful 1 Amp motor drive.
Includes all standard TCS decoder features including: Auto-Adjusting BEMF / Load Compensation
Dimensions : 0.51" X 0.26" X 0.11" or 12.95mm. X 6.65mm. X 2.79mm.
|
|
MZA4 Z scale decoder for Microtrains locos
True "Drop-in" decoder, easy installation.
Fits Micro-Trains Line of Z-Scale Diesel Locomotives.
Super small size with powerful 1 Amp motor drive.
Includes 3mm super-bright, golden white LED's.
Includes all standard TCS decoder features including: Auto-Adjusting BEMF / Load Compensation.
Dimensions : 1.92" X 0.32" X 0.11" or 32.86mm. X 8.12mm. X 2.94mm.
|
|
EEUN651 European N scale
Two Function, 6-Pin NEMA type, 1 Amp Continuous (2 Amp Peak) European Outline decoder for N-Scale Locomotives. 14.4mmx9.12mmx3.43mm. BEMF
|
|
3mm Sunny White LED Kit
A LED Kit comprised of two Sunny-White LED's, (3) wires and (2) 680 ohm resistors.
|
|
3mm Golden White LED kit
A LED Kit comprised of two Gold-White LED's, (3) wires and (2) 680 ohm resistors.
|
|
Wire stripper
|
|
Lenz 0511D decoder with Silent Drive
|
|
Lenz Standard Decoder 1.0/1.8A 3 Functions
|
|
Fitting a drop in decoder
This is the charge to fit and test a drop in decoder.
|
|
Fitting a wired decoder
Fitting for a wired decoder in a loco.
|
|
6 pin 2x3 Connector
6 pin dual row. 2x3 pin array, micro connector with 6" 32 gauge wire connected. Overall connected socket size .165" x .119" x .465" (.165mm x 3.02mm x 11.74mm)
|
|
4 pin micro connector
4 pin micro connector with 6" 32 gauge wire connected. Connector size .214 X .083 x .244
|
|
Tam Valley Depot Hex Juicer
For DCC systems 2 Amps to 8 Amps including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings. Setup is simple, connect the input to the DCC track bus, and connect the output wires either to six frogs or rails. Two jumper controls whether the two, four or six outputs act as pairs (i.e. an auto-reverser) or independently (i.e. a pair of frog juicer). Should not be used with boosters over 10 Amps. See the Dual Frog Juicer for 10 Amp boosters.
|
|
Tam Valley Depot SwitchWright DCC Red/Green
SwitchWright - Servo-based switch machine. Compact, versatile and powerful, the SwitchWright is a simple and easy to under the table switch machine. Complete with DCC and a DPDT relay for powering the frog and other accessories. Can be controlled with a ready-to-mount fascia controller with indicator LEDs or use a toggle switch. Control panels are simple with our plug-in controller - no soldering needed.
Want DCC control? A builtin DCC stationary decoder allows you to use DCC, a pushbutton or both.
Multiple Controllers? Just use a Y cord and you can add a second controller. A second Y cord and you can have 3 controllers.
Crossover and passing sidings with single button control? You can use a Y cord to add a slave machine that will move in parallel so you can move two turnouts with one button. Ideal for controlling crossovers and passing sidings. Double crossover? Just add 3 more slaves with Y cords and all 4 points of a double crossover can be controlled with one pushbutton.
Based on an RC servo the SwitchWright is only 1.5” tall and 2” wide with a 3” actuating wire.
|
|
Tam Valley Depot FCB012 Bicolor Controller
Bicolor Fascia Controller for SwitchWright/Quad/QuadLN/Octopus II/Octopus III
This controller is identical to the above controller except that it has two Red/Green Bicolor LEDs instead of the 2 yellow LEDs. Each LED alternates between red and green so both LEDs are lit whereas in the regular yellow LED controller one LED is on at a time. The LED colors in photo are a bit washed out due to the limits of photography. Other than the LEDS it is identical to the single-color Fascia Controller.
|
|
Tam Valley Depot Bicolor Fascia Control Kit (builds 4)
Contains PC boards and parts needed to build 4 fascia controllers with bi-color LEDs (3-lead type). The resistors and transistors are pre-mounted and the board tested. An advantage of building from the kit is that you can mount the components on a control panel anywhere you wish and then wire them back to the PC board. Requires four 3-wire servo extension cords to hook up to the Quad/Octopus main board
|
|
|
|
Shopping cart software
and credit card processing provided by ezimerchant
|
